Mode of application

Eyebrow Tinting Steps

1. Preparation for Dyeing

Use ÉLAN “DETOX-MOUSSE” to degrease hair and skin before eyebrow tinting. Remove residue with a cotton pad moistened with water.

1. Eyebrow shaping

Shape eyebrows with product of your choice.

1. Preparation of the Dye Mixture

Mix the “SBTS” Tinting System or ÉLAN Tinted Eyebrow Gel with the 3.5% Oxidizing Emulsion in a 1:1 ratio in a non-metallic bowl.

For a more intense color or a new tone, add the Brow Color Booster 2.0:

• Eyebrow tint (49%) + Oxidizing emulsion (49%) + Booster (2%) = Mixture (100%)

1. Application of the Dye

Apply the dye mixture to the eyebrows in the desired shape. Leave on for 5 to 15 minutes depending on the desired result. Remove with a damp cotton pad. Use a cotton swab soaked in ÉLAN “REMOVER” to remove any excess.

1. Fixing

Apply ÉLAN “COLOUR FIX” for extended hold.

Precautions

Perform an allergy test 48 hours before use. This product contains p-phenylenediamines and resorcinol.

Eyebrow Bleaching Steps

1. Mix the 3.5% oxidizing emulsion with the bleaching powder (Carbon or Ultramarine) in a 2:1 ratio.
2. Apply the mixture to thick hair, then distribute with a brush.
3. Leave on for 3-15 minutes.
4. Remove with a damp cotton pad. For a lighter tone, repeat the procedure.
5. Finish with ÉLAN's “DETOX-MOUSSE” and “COLOUR FIX”.

Important: do not dye eyebrows immediately after bleaching to avoid a result that is too dark.

Storage Conditions: Store between +5°C and +25°C, away from children and direct light.